- -10%
Language:
My Account
0
Rowa Phos D&D 250g
Rowa Phos removes more phosphate than any other anti-phosphate currently available.
In stock - Dispatched within 24 hours
€19.90
€17.91
Specific References
- EAN13
- 4032974404023
- Weight
- 0.3 kg
En savoir plus
Rowa Phos is a brand new material designed for the removal of phosphates.
The brand Rowa guarantees that Rowa Phos removes more phosphate than any other commercially available anti-phosphate product on the market today.
Phosphate adsorption capacity: 25g per kilogram of RowaPhos.
Usage advice.
To achieve the best phosphate and silicate reduction results with RowaPhos resin and to maintain near-zero levels in your aquarium, it is advisable to follow the product recommendations and use the resin regularly, renewing it, for instance, every 1 to 2 months.
It will be difficult to keep the levels low with only occasional use.
Phosphates are a known source of cyanophyte invasion in aquariums, red for marine water or green for freshwater aquariums. As a nutrient source for these harmful algae, few freshwater aquarists think to eradicate this scourge with an anti-phosphate resin. The practice is much more widespread for marine aquariums.
RowaPhos absorbs phosphates, silicates, and arsenic. It is completely safe for use in both freshwater and marine aquariums. Once exhausted, it does not release any chemicals into the water.
Rowa Phos has been tested for longevity over 5 years without any changes; no re-release has been measured.
method:
Never wash the product. It must be kept moist at all times; it is not effective if it dries out. After use, close the lid or repackage it in another container.
Place the product between two layers of Perlon and use it in a high-flow area if possible. Otherwise, use a sock and place it in a location with strong water flow in the aquarium.
Do not pour into the aquarium without a container.
Do not place it in the water without surrounding it with filter wool such as perlon.
You can use a fluidized filter, but keep a layer of perlon at its outlet to prevent the dispersion of colored dust. The active base of the product is likely iron oxide (an assumption by Atlantid-France and only representing our view).
Regularly measure the phosphate levels to monitor the effectiveness of the resin. When they rise, you need to replace your anti-phosphate resin.
Note: Unfortunately, most of the available phosphate test kits are not capable of detecting trace levels of phosphate.
It is necessary in a reef aquarium, for example, not to exceed a rate of 0.015ppm.
"For the aquarium, slightly higher levels can be tolerated."
It is a highly active filtration material, suitable for use in both freshwater and saltwater.
It binds the phosphate without any negative effect anddoes not release any chemicals into the water either"Once exhausted."
- 100 ml of Rowa Phos treats up to 800 liters of freshwater and 400 liters of saltwater.
- 250 ml of Rowa Phos treats up to 2000 liters of freshwater and 1000 liters of saltwater
- 500 ml of Rowa Phos treats up to 4000 liters of freshwater and 2000 liters of saltwater.
- 1000 ml of Rowa Phos treats up to 8000 liters of freshwater and 4000 liters of saltwater
Usage advice.
To achieve the best results in reducing phosphates and silicates with Rowa Phos resin and to maintain phosphate levels close to zero in your aquarium, it is recommended to follow the product guidelines and use the resin regularly.
Phosphates are a known source of cyanobacteria invasion in aquariums, red for saltwater or green for freshwater aquariums. They are a nutrient source for these harmful algae.
RowaPhos absorbs phosphates, silicates, and arsenic. It is completely safe in both freshwater and marine aquariums.
Note:
Never wash the product. It must be kept moist at all times; it is not effective if it dries out. After use, close the lid or repackage it in another container.
Place the product either in its provided sock or between two layers of perlon and use in forced passage if possible.
Do not pour into the aquarium without a container.
You might also like
Reviews (6) - Review moderation
83% (5)
17% (1)
0% (0)
0% (0)
0% (0)
Rowa phos
Produits excellent je recommande.
By patrick c. the 08/09/2023
Résine anti Po4
Super résine en FLF.
By Guilhem E. the 04/26/2022
rowa
le meilleur
By Christophe b. the 04/01/2022
Impeccable
Super résine, je ne la rince pas comme indiquée sur la notice, elle fonctionne à merveille. A changer quand on voit que les PO4 remontent.
By Marina H. the 02/26/2021
Rowa phosphore
Ce produit est le meilleure qui existe aux monde chère mais très efficace. Je n'ai jamais de phosphate dans mon aquarium marin depuis que j'utilise ca fait 5 ans. Change une fois part mois voir deux.
By Massimo r. the 05/10/2016
Rowa Phos removes more phosphate than any other anti-phosphate currently available.