Rowa Phos D&D 100g Anti-Phosphate Resin

The brand Rowa Guarantees that RowaPhos removes more phosphate than any other anti-phosphate available on the market.

Phosphate adsorption capacity: 25g per kilogram of RowaPhos

Usage advice:

To achieve the best results in reducing phosphate and silicate with RowaPhos resin and to maintain near-zero levels in your aquarium, follow the product's recommendations and use the resin regularly, for example, replacing it every 1 to 2 months. It will be difficult to keep low levels with sporadic use.

Never wash the product.

It must be kept moist at all times; it is not effective if it dries out.

After use, close the lid or repackage it in another container.

Place the product between two layers of perlon and use in forced flow if possible.

Otherwise, use a sock and place it in an area with high water flow in the aquarium.

Do not pour into the aquarium without a container.

Regularly measure the phosphate level to monitor the resin's effectiveness.

When levels rise, you need to replace your anti-phosphate resin.

- 100 ml of Rowa Phos treats up to 800 l of freshwater and 400 l of saltwater

- 250 ml of Rowa Phos treats up to 2000 l of freshwater and 1000 l of saltwater

- 500 ml of Rowa Phos treats up to 4000 l of freshwater and 2000 l of saltwater

- 1000 ml of Rowa Phos treats up to 8000 l of freshwater and 4000 l of saltwater

RowaPhos absorbs phosphates, silicates, and arsenic. It is completely safe in freshwater and saltwater aquariums. Note: Never wash the product. It must be kept moist at all times; it is not effective if it dries out. After use, close the lid or repackage it in another container. Place the product either in its provided sock or between two layers of perlon and use in forced flow if possible. Do not pour into the aquarium without a container.