Rowa Phos D&D 500g Anti-Phosphate Resin

Rowa Phos Deltec 500ml Anti-Phosphate Resin Phosphate adsorption capacity: 25g per kilogram of RowaPhos

Usage Advice:

To achieve the best results in reducing phosphates and silicates with RowaPhos resin and to maintain near-zero levels in your aquarium, it is advisable to follow the product recommendations and use the resin regularly, renewing it, for example, every 1 to 2 months. It will be difficult to maintain low levels with sporadic use.

Never wash the product.

It must be kept moist at all times; it is not effective if it dries out.

After use, close the lid or repackage it in another container.

Place the product between two layers of perlon and use in forced flow if possible.

Otherwise, use a sock and place it in a high-flow area of the aquarium water.

Do not pour into the aquarium without a container.

Regularly measure the phosphate level to monitor the resin's effectiveness.

When the levels rise again, you need to renew your anti-phosphate resin.

- 100 ml of Rowa Phos treats up to 800 liters of freshwater and 400 liters of seawater

- 250 ml of Rowa Phos treats up to 2000 liters of freshwater and 1000 liters of seawater

- 500 ml of Rowa Phos treats up to 4000 liters of freshwater and 2000 liters of seawater

- 1000 ml of Rowa Phos treats up to 8000 liters of freshwater and 4000 liters of seawater

RowaPhos absorbs phosphates, silicates, and arsenic. It is completely safe in freshwater and marine aquariums. Note: Never wash the product. It must be kept moist at all times; it is not effective if it dries out. After use, close the lid or repackage it in another container. Place the product either in its provided sock or between two layers of perlon and use in forced flow if possible. Do not pour into the aquarium without a container.