Rowa Phos D&D 1000g

Rowa Phos Deltec 1000ml Phosphate adsorption capacity: 25g per kilogram of RowaPhos

Usage advice:

To achieve the best results in reducing phosphates and silicates with RowaPhos resin and to maintain near-zero levels in your aquarium, it is advisable to follow the product recommendations and use the resin regularly, for example, by renewing it every 1 to 2 months. It will be difficult to keep levels low with occasional use.

Never wash the product.

It must be kept moist at all times; it is not effective if it dries out.

After use, close the lid or repackage it in another container.

Place the product between two layers of perlon and use it in forced flow if possible.

Otherwise, use a sock and place it in an area with high water flow in the aquarium.

Do not pour into the aquarium without a container.

Regularly measure the phosphate level to monitor the effectiveness of the resin.

When it rises, renew your anti-phosphate resin.

- 100 ml of Rowa Phos treats up to 800 liters of freshwater and 400 liters of saltwater

- 250 ml of Rowa Phos treats up to 2000 liters of freshwater and 1000 liters of saltwater

- 500 ml of Rowa Phos treats up to 4000 liters of freshwater and 2000 liters of saltwater

- 1000 ml of Rowa Phos treats up to 8000 liters of freshwater and 4000 liters of saltwater

RowaPhos absorbs phosphates, silicates, and arsenic. It is completely safe in both freshwater and saltwater aquariums. Note: Never wash the product. It must be kept moist at all times; it is not effective if it dries out. After use, close the lid or repackage it in another container. Place the product either in its provided sock or between two layers of perlon and use it in forced flow if possible. Do not pour into the aquarium without a container.