Digital Inline TDS - Titanium S2 Conductivity Meter Autoaqua

Titanium S2 is an inline TDS meter with 2 probes, allowing you to measure and control very simply and accurately the level of dissolved solids (TDS) at 2 locations of your choice, typically at the inlet and outlet of a reverse osmosis system. It allows, for example, to immediately see if the water quality at the outlet of a reverse osmosis system is pure or not.
 
Titanium S2 is equipped with 2 titanium probes, offering excellent corrosion resistance. It can be regularly calibrated to obtain accurate results. Its magnetic back makes it easy to install on the metal frame of a reverse osmosis system.
 
Titanium S2 is also a very good indicator for changing the filtration cartridges or the membrane of the reverse osmosis system.
 
Titanium S2 automatically turns off after 3 minutes of non-use to preserve battery life.

Titanium S2 can be installed very easily using the included ¼" Push Connect "T" fittings. Simply cut the tubing at the desired measurement points, insert the provided fittings, and then insert the electrodes.
ADD TO CART

Included:
1x Titanium S2 - Digital Inline TDS meter
2x ¼" Push Connect "T" union
1x Power source, CR2032 lithium battery
 
Specifications:
Measurements: 0-999 ppm
Resolution: 1 ppm
Accuracy: +/- 2%.
Battery life: ~ 1 year