Easybooster Nano 250 ml Phytoplankton Gel for Corals and Microfauna

Easybooster Nano 250 ml - EASYREEFS

Description

Easybooster Nano, for direct feeding of aquarium corals, filter feeders, and zooplankton.

This new format is specifically developed to be automatically dosed in aquariums from 14 to 200 L.

Available in two sizes: 90 ml and 250 ml.

This product has a very long expiration date. The expiration date does not change even if it has started to be used. The reason the date does not change or the formula is not modified is that the bag compresses when the gel is dispensed. This prevents air from entering the bag and thus prevents the oxidation of the phytoplankton.

This Prof format is intended for use in aquariums of more than 500 liters (approximately 375 doses of 8 ml) or large installations.

Instructions for Use

Easybooster: Four species of Easy Reefs® microalgae are used: Isochrysis T-Iso (33.3%), Nannochloropsis (31%), Tetraselmis (18%), Phaeodactylum (18%), thus achieving an optimal nutritional balance.

The dose varies slightly depending on the load of organisms in the aquarium, but is generally established between 8 ml (basic or maintenance regime) and 16 ml/day (medium-high demand) for an aquarium with a gross volume of 1000 liters.

It is advisable to distribute the Easybooster dose throughout the day. It is not necessary to turn off the skimmer.

We recommend starting the use of Easybooster by increasing the weekly doses with the following protocol:

For a gross aquarium of 1000 L:

- 1st week; 2 ml/day
- 2nd week; 4 ml/day
- 3rd week; 6 ml/day
- 4th week; 8 ml/day (basic or maintenance regime).

From the 4th week, we can gradually increase the dose by increments of 2 ml per week until reaching high levels of zooplankton production, which will feed the fish, invertebrates, and corals.
For proper dispersion, Easybooster should be introduced into the aquarium near a pump ensuring good water circulation.

Examples of Use

- Administration by pipette near a circulation pump.

- Towards the sump aquarium by peristaltic pump.

In this example, the output of the peristaltic pump is connected to the input of the return pump.