Jaeger EIHEM 100W

Jaeger EHEIM 100W

With the EHEIM precision regulator heater, your fish get exactly the right temperature - in every aquarium.

Description

The simplest ideas are often the best. This is true for the aquarium heating rod. It is simply suspended in the water and heats it. The principle is still the same as it was decades ago. However, in the meantime, the EHEIM JÄGER regulator heater has become a state-of-the-art thermal device. The temperature can be set precisely and is maintained consistently. A special laboratory glass jacket enlarges the heating surface, serves as a thermal shield, and ensures even heat distribution. And whether you want to heat an aquarium of 20 or 1000 liters, you can choose from 9 sizes.

Information

Precision, comfort, quality, and safety "Made in Germany"

The temperature can be set precisely from 18 to 34 ° C and readjusted if necessary (± 2 °). The control precision is ± 0.5 ° C.

The heat is maintained consistently. An indicator light shows the heating function.

The rod is completely waterproof, can be fully submerged, has dry-running protection (Thermo Safety Control), and is suitable for both freshwater and saltwater.
 
One of the most important innovations is the glass jacket:
- it enlarges the heating surface,
- compresses the heat, ensures optimal and even heat emission, and
- forms a thermal shield (aquarium inhabitants are not at risk from touching it).

The jacket is made of special laboratory glass. It was created for research purposes. Therefore, it is free from pollutants that could be released into the water. It is resistant to chemical and biological substances. There are no cracks or capillary fissures through which condensation water could enter. It is shock-resistant. And even extreme temperature fluctuations, such as those that can occur during water changes, do not affect this glass.

Advantages

- Precise temperature setting from 18 to 34 ° C
- Simple and safe readjustment (± 2 ° C)
- Control precision ± 0.5 ° C
- The heat is maintained consistently
- The control light indicates the heating function
- Fully submersible (waterproof)
- With dry-running protection (Thermo Safety Control)
- The glass jacket enlarges the heating surface and ensures optimal and even heat dissipation
- Comfortable cable length approx. 170 cm
- Including double suction holder
- For aquariums of 100 to 150 liters
- Suitable for both freshwater and saltwater

- dimensions: 319 mm for a diameter of 36 mm

FAQ

There is moisture in my aquarium heater. Is it dangerous?

No, every aquarium heater that leaves our factory undergoes a waterproof test. Thus, we can guarantee that all aquarium heaters leaving our factory are waterproof.

However, if you notice condensation on the glass bulb of your aquarium heater, then condensation has probably formed. This condensation can occur for the following reason.

When the aquarium heater heats the aquarium water, very high temperatures occur inside the heater itself. Therefore, the air in the heater expands. This air escapes through the cable so that the heater does not burst due to the overpressure that now occurs.

When the heater turns off, the cooling air contracts and creates negative pressure. The air is now drawn into the heater via the cable. The air can be very humid, depending on the weather or season, and this humid air condenses inside the heater and settles on the glass, as the glass is the coldest part of the heater.

Since this moisture accumulation has no conductive connection to the aquarium water, the operation is completely harmless. The operation of the aquarium heater is also in no way impaired.