Jaeger EIHEIM 300W

Jaeger EHEIM 300W

With the EHEIM precision regulator heater, your fish get exactly the right temperature - in every aquarium.

Description

The most obvious ideas are often the best. The same goes for the aquarium heating rod. It is simply hung in the water and heats it. The principle is the same as it was decades ago. However, in the meantime, the EHEIM JÄGER regulator heater has become a state-of-the-art thermal device. The temperature can be set precisely and is kept constant. A special laboratory glass sleeve enlarges the heating surface, serves as a thermal shield, and ensures even heat emission. And whether you want to heat a 20 or 1000-liter aquarium, you can choose from 9 sizes.

Information

Precision, comfort, quality, and safety "Made in Germany"

The temperature can be precisely adjusted from 18 to 34°C and readjusted if necessary (± 2°C). The control accuracy is ± 0.5°C.

The heat is kept constant. An indicator light shows the heating function.

The rod is completely waterproof, can be fully immersed, has dry run protection (Thermo Safety Control), and is suitable for both freshwater and saltwater.
 
One of the most important innovations is the glass jacket:
- it enlarges the heating surface,
- compresses the heat, ensures optimal and even heat emission, and
- forms a thermal shield (aquarium inhabitants are not afraid to touch it).

The jacket is made of special laboratory glass. It was created for research purposes. Therefore, it is free of pollutants that could be released into the water. Chemical and biological substances do not attack it. There are no cracks or capillary cracks through which condensation water could penetrate. It is shock-resistant. And even extreme temperature fluctuations, such as those that can occur during water changes, do not affect this glass.

Advantages

- Precise temperature adjustment from 18 to 34°C
- Simple and safe readjustment (± 2°C)
- Control accuracy ± 0.5°C
- Heat is kept constant
- Control indicator shows the heating function
- Fully submersible (waterproof)
- With dry run protection (Thermo Safety Control)
- The glass sleeve enlarges the heating surface and ensures optimal and even heat dissipation
- Comfortable cable length approx. 170 cm
- Includes double suction cup holder
- For aquariums from 600 to 1000 liters
- Suitable for both freshwater and saltwater

- Dimensions: 506 mm for a diameter of 36 mm

FAQ

There is moisture in my aquarium heater. Is it dangerous?

No, every aquarium heater that leaves our facility undergoes a waterproof test. Thus, we can guarantee that all aquarium heaters that leave our facility are waterproof.

However, if you notice condensation on the glass bulb of your aquarium heater, then condensation has probably formed. This condensation can have the following reason.

When the aquarium heater heats the aquarium water, very high temperatures occur inside the heater itself. Therefore, the air in the heater expands. This air escapes through the cable so that the heater does not burst due to the overpressure that now occurs.

When the heater turns off, the cooling air contracts and negative pressure is created. Air is now drawn into the heater through the cable. The air can be very humid, depending on the weather or season, and this humid air condenses inside the heater and settles on the glass, as the coldest part of the heater.

Since this moisture buildup has no conductive connection to the aquarium water, the operation is completely harmless. The operation of the aquarium heater is also in no way impaired.