Professional ICP OES Seawater Analysis ATI

Professional ICP OES Seawater Analysis by ATI Test your water quality with the ICP-OES ARCOS II machine (photo2). The company Ati chose one of the most efficient analyzers in its category. It is characterized by its high precision and is used wherever high demands for element analysis are required.

It is therefore not surprising that with the ARCOS II, ati can detect trace elements at concentrations below 1 μg / l (0.001 mg / l).

We are able to identify, using analysis, sources of pollution that could be the cause of many problems and thus optimize your water quality.

Here are the measured values:

Salinity, KH, chloride, sodium, sulfur, magnesium, calcium, potassium, bromine, strontium, and boron. Minor elements: aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, chromium, cobalt, copper, iron, iodine, lead, lithium, manganese, mercury, molybdenum, nickel, phosphorus, selenium, silicon, silver, thallium, tin, titanium, vanadium, and zinc.

The free online laboratory from ati helps you interpret your results.

How it works:

Once the packet is received (2 bottles with barcodes are present in the packet + the instructions)

Instructions for ATI tests

1) Create an account on the site: lab.atiaquaristik.com, with your email address where the test results will be sent.
2) Register your main aquarium and create an additional aquarium for the osmosis water.
3) Activate the analysis by pressing "Neue Wasserprobe einreichen" and copy the barcode number of the test tubes (1 barcode for the aquarium, the osmosis water is automatically associated with the process).
4) Fill the three seawater test tubes, after rinsing the test tubes well with seawater; fill the red test tube with osmosis water = RO, write with a marker the number found to the left of the osmosis water line on the site.
5) Send the 4 test tubes by mail in the enclosed envelope and wait for the results on the site.