JEBAO SOW8

This pump SOW-8 includes a control device that can connect to up to eight other wireless SW model pumps.

The SOW8 pump can range from 700L/h to 8000 L/hour for only 6 Watts 12 / 24 V. 1 year warranty

In April 2015, Jebao changed its name to JECOD. In 2017, the RW range became SW, the size of the pumps decreased, and the noise levels lowered.

Characteristics:

- 8 different flow rates (700 - 8000 Liters)

- Super silent

- Wireless controller to connect a master/slave pump

- Magnetic support with night sensor, automatically detects when lights are off and slows the pump.

- One-touch feeding mode = slows the pump for a period of 10 minutes.

- High performance, powerful water flow combined with low energy consumption.

- Ceramic shaft for long life and durability

- Intelligent control system to generate various wave patterns according to your aquarium.

- Extra-long cable for ease and comfort of placement, even in larger aquariums.

- Low voltage, safe and reliable power supply

- Suitable for both freshwater and saltwater

Wave Mode

- W1

Wave mode: the remoting button is necessary when using this mode to adjust the wave patterns among one or several pumps simultaneously.

As the water volume differs from the tank capacity, the wave period needs to be adjusted by turning the dial. Increase the wavelength by turning the dial clockwise.

Tips: You should turn the dial gradually and you will see the waveform shortly after each adjustment.

Press "SPEED / FEED" to adjust the flow rate.

- W2

Sinusoidal mode: one or several pumps can operate simultaneously in this mode. The power varies between 30 and 100% and the wave resembles a sinusoidal curve.

- H

Flow mode: one or several pumps can operate simultaneously at a constant flow. The flow rate can be adjusted by "SPEED / FEED"

- C

Double flow mode: two pumps are required, and the waves change flow in cycles.

The cycles are as follows: P1 works, P2 stops; P2 works, P1 stops; P1 and P2 stop. And the cycle period (1s to 1min) can be adjusted by turning the dial and set the flow rate by pressing SPEED / FEED