JEBAO SOW4

This SOW-4 pump includes a control device that can connect up to eight other wireless SW model pumps. The SOW4 pump can vary from 500L/h to 4000 L/h for only 10 Watts 12 / 24 V. The slave pumps can be individually adjusted, while the main pump controls the wave function.

April 2015 Jebao changes its name to JECOD - 2017 the RW range becomes SW, the size of the pumps and the noise decreases

Features (Jebao SW4 Wireless Wave Maker)

- 8 different flow rates (500 - 4000 Litres)

- Super silent

- Wireless controller to connect a master/slave pump

- Magnetic support night sensor, automatically detects when the lights are off and slows down the pump.

- One-touch feeding mode = slows down the pump for a determinable period.

- High performance, powerful water flow combined with low energy consumption.

- Ceramic shaft for long life and durability

- Intelligent control system to generate various wave patterns according to your aquarium.

- Extra-long cable for ease and comfort of placement, even on larger aquariums.

- Low voltage, safe and reliable power supply

- Suitable for freshwater and saltwater

Wave Mode

- W1

Wave mode, the remote button is necessary when using this mode to adjust the wave patterns among one or multiple pumps at the same time.

As the water volume is different from the tank capacity, the wave period needs to be adjusted by turning the dial. Increase the wavelength by turning the dial clockwise.

Tips: You should turn the dial gradually and you will see the waveform shortly after each adjustment.

Press "SPEED / FEED" to adjust the flow rate.

- W2

Sine wave mode, one or multiple pumps can operate at the same time in this mode. The power varies between 30 and 100%, and the wave resembles a sine curve.

- H

Flow mode, one or multiple pumps can operate at a constant flow rate. The flow rate can be adjusted by "SPEED / FEED".

- C

Dual flow mode, two pumps are required, the waves change flow rates in cycles.

The cycles are like: P1 working, P2 stopped; P2 working, P1 stopped; P1 and P2 both stopped. And the cycle period (1s to 1min) can be adjusted by turning the dial and adjusting the flow rate by pressing SPEED / FEED.

Size: 7.5 x 6.5 x 5.5 cm 0W to 10W at 240v