- Out-of-Stock
- Menu
-
Corals & invertebrates
-
Saltwater aquarium equipment
-
Saltwater fish
- Detritivores
-
Living Stones & Co
-
Freshwater
- Fish tank
Sea Salt 19KG carton Aquaforest
Sea Salt 19kg - Aquaforest
Synthetic sea salt for aquariums with fish, corals, and less delicate invertebrates.
En savoir plus
Sea Salt 19kg - Aquaforest
Description
Synthetic sea salt for aquariums with fish, corals, and less delicate invertebrates. When setting up new aquariums, it is recommended to place the first animals no earlier than 10 to 14 days after filling the aquarium. Once the salt is dissolved, freshly prepared seawater can be used immediately.
Preparation
- Dissolve the salt in previously prepared demineralized water.
- The water temperature should be around 24°C (75°F). For a salinity of 30 ppt, dissolve approximately 345 g (12.16 oz) / 10 l (2.7 US gal) of water.
- Stir the solution vigorously for about 15 minutes.
- When the salt is completely dissolved and the solution is clear, the saline water is ready to use.
Recommendation
- Store the salt in a dry and dark place.
- Once dissolved, use the salt within 5 days.
- Keep out of reach of children.
- Product for aquarium use only.
- Not suitable for human consumption.
- Safety data sheet available upon request.
Information
Aquaforest products are manufactured in the EU under strict laboratory supervision to meet the highest quality standards. Each product is prepared from carefully selected raw components in proven quantities to produce a consistent composition.
How is our Marine Salt product range tested?
We mix our sea salt in batches of 1 metric ton (2204 lb), and 3 separate samples per batch are collected during the production stage for testing. Each of these samples is dissolved in 15 liters (4 US gal) of RO water. Our team of experienced professionals performs ICP-OES analyses to verify that the chemical composition is within a consistent range and to exclude the presence of undesirable contaminants at the same time. Note: even though our salt is well mixed, not all buckets/boxes will be identical. Parameters may vary slightly between containers, and a variation of about 2-3% is acceptable. This fluctuation results from both the physical properties of the mixture and the limits of available processing techniques. These variations are even smaller than the typical margin of error of popular test kits for hobbyists.