- Menu
-
Corals & invertebrates
-
Saltwater aquarium equipment
-
Saltwater fish
- Detritivores
-
Living Stones & Co
-
Freshwater
- Fish tank
DOC Skimmer 9430.001 DC TUNZE
DOC Skimmer 9430.001 - TUNZE
The DOC Skimmer 9415, 9430, and 9460 are characterized by a very compact design and high efficiency, so they can be easily installed in any filter system.
En savoir plus
DOC Skimmer 9430.001 - TUNZE
Recommended for saltwater aquariums up to 3000 liters.
- Immersion depth: 100 to 200 mm without adjustment
- Dimensions (L x W x H): 350 x 300 x 490 mm
- Water flow rate: 1500 l/h
- Air flow rate: 1400 l/h
- Power consumption: 24 W, 230V / 50Hz (32 W, 115V / 60Hz)
- Skimmer capacity: 2 liters
- Skimmer with lid dimensions: ø 215 x H 218 mm
- To remove the skimmer, it must be lifted by at least 71 mm.
Technical Features
How to choose the right DOC skimmer for a saltwater aquarium?
Each marine aquarium has, due to an individually created biotope, a different sensitivity to the load of organic compounds. The assumptions regarding the tank size are for the average soft coral marine aquarium, so these recommendations may differ depending on the biotope composition. Therefore, for sensitive biotopes, when choosing a skimmer, the recommended volume should be reduced or corrected as needed.
Low sensitivity
In aquariums containing soft corals, such as long polyps and anemones, the amount of dissolved organic compounds can be higher and sometimes even essential to life.
The DOC skimmer for this aquarium volume can be used without the need for a patch.
Medium sensitivity, 40% reduction
In mixed tanks containing both soft and hard corals (LPS), a medium sensitivity to changing organic conditions is generally observed. Zooplankton, sponges, etc., are also often found in these aquariums. For these aquariums, approximately a 40% correction of the indicated skimmer capacity is calculated.
A DOC skimmer up to 1000 liters should be used for a maximum tank of about 600 liters.
High sensitivity, 60% reduction
Aquariums predominantly composed of SPS stones require a particularly high degree of water purity. They should not be loaded with phosphate or nitrate. High oxygen saturation and clear water are essential. The DOC Skimmer is often used in these aquariums as a "standalone" solution.
A DOC skimmer up to 1000 liters should be used up to a tank of about 400 liters.
High sensitivity and high load, 70% reduction
Aquariums containing hard corals and many fish require a very high skimmer capacity. A skimmer must provide a high degree of water purity for stone corals with a relatively large number of fish. When used as a "standalone" skimmer, it must be particularly efficient.
A DOC skimmer up to 1000 liters should be used up to a tank of about 300 liters.
In plankton breeding tanks, 70% reduction
Hard coral or plankton breeding tanks for feeding require a particularly high degree of water purity. High oxygen saturation and clean water are essential.
A DOC skimmer up to 1200 liters should be used in a tank of about 360 liters.
TUNZE® DOC Skimmer 9415, 9430, and 9460
The DOC Skimmer 9415, 9430, and 9460 are characterized by their very compact design and high efficiency, so they can be easily installed in any filter assembly. They are compatible with TUNZE® Hydrofoamer pumps 9420.040, 9430.040, or 9460.040, which ensure both foam production and water circulation.
In the package: ready-to-install device with accessories.
For aquariums up to 1000 liters:
Standard aquarium with glass dimensions (L x W x H) 1000 x 400 x 500 mm, glass thickness 8 mm.
Water level: 150 mm, safety volume approx. 140 liters.
For aquariums up to 1500 liters:
Standard aquarium with glass dimensions (L x W x H) 1200 x 400 x 500 mm, glass thickness 8 mm.
Water level: 150 mm, safety volume approx. 160 liters.