Tunze 6040

Turbelle nanostream 6040 - TUNZE

For aquariums from 20 to 500 liters.

- Flow rate: approximately 200 to 4500 l / h
- with Turbelle® Controller
- Power consumption: 1.5 - 13 W
- Power supply: 100-240V / 50-60Hz
- Cable length: 3 m
- Dimensions without flow angle + magnetic holder: 60 x 43 x 68 mm
- Output: ø40 mm
- Silence Magnet Holder for glass up to 15 mm thick.

Pumps with electronically controlled synchronous motor - including Turbelle® Controller

The Turbelle® Controller is a control device that allows you to adjust the different performances of the pump. It enables wave simulation, generation of an oscillating current, automatic search for the resonant frequency of the oscillating current, and also has a feeding timer. It can also be directly connected to the Multicontroller / SmartController 7000. The pump can thus operate with other pumps in flow simulation and drainage mode. If the Moonlight 7097.050 photoelectric cell (to be ordered separately) is connected to the Turbelle® regulator, the night reduction is activated automatically. If the controller is connected to a second controller via cable 7092.300, another pump can be connected and controlled, for example to simulate a wave impact or generate an oscillating current. Thanks to the Y 7090 cable adapter.

Turbelle® nanostream® 6040

This very compact flow pump for aquariums from 20 to 500 liters can be easily placed behind decorations. As a result, the general impression of harmony is preserved in a small aquarium - perfect for setting up aquariums. Thanks to the special flow angle and magnetic holder, it is possible to adjust the wide water jet at the pump outlet in three directions. Thanks to the silence holder, the pump is not placed on the aquarium glass and can no longer transmit vibrations. This makes it one of the quietest devices on the market.
Turbelle® nanostream® 6040 electronic WIDE FLOW is our smallest flow-controlled pump with a low safety voltage of 12 V. It features a Fish Care function that moves the rotor every 20 seconds when stopped. Controlled with Multicontroller / SmartController 7000.